How do you reset the radio on a Dodge Ram 1500?
To begin, turn Your ignition on, but You don’t need to start the engine. Now go to the Uconnect screen and hit the button at the bottom that says “Apps” and then hit the right side arrow button. Click on “Settings” at the bottom right of the screen. Now scroll down all the way and click on “Reset”.
What is the IOD fuse on a Dodge Ram?
This IOD or “Ignition Off Draw” fuse is used during assembly line work, and when vehicles are in storage on dealer lots to prevent battery going dead. It is recommended if vehicle sits unused for a period of time, say for more than 10 days or so, that you pull it to shut off parasitic drain to the battery.
Where is the IOD fuse 2003 Dodge Ram?
The Ignition-Off Draw (IOD) fuse is located in the Total Integrated Power Module (TIPM), usually found near the battery in the engine compartment.
Where is the fuse for the radio on a Dodge Ram 1500?
The Ram also contains an interior set of fuses located next to the driver’s left knee in the dash. The panel sits above the OBD port. The cabin box should hold a 30 amp “AMP” fuse as well that also impacts the radio’s function.
How do I reset my RAM radio?
How to Reboot the Radio on the 2019 Ram 1500
- Turn the ignition on to power the accessories.
- Once the Uconnect screen lights up, press the ‘Apps’ button.
- Press the right arrow to move to the next screen and select settings.
- Scroll down the list to find ‘Restore Settings’ and press it.
How do I reset my 2012 Dodge Ram radio?
To perform a 2012 Dodge Ram 1500 radio reset, hold down the up and down buttons for 5 seconds and select radio reset. You will come into difficulties with the sound. This might be from the stereo’s speakers or a phone that is connected to the vehicle.
How do I reset my radio in my RAM?
How do I reset my Dodge radio?
Simultaneously press the volume button and the tuner knob at the same time. Continue pressing them down for 10 – 20 seconds. After pressing the buttons for 10 – 20 seconds, the touchscreen display should flash the brand of your vehicle (FIAT, RAM, or Dodge), then proceed to go dark.
What is a EBL relay?
The rear window defogger (EBL) relay is located in. the IPM in the engine compartment. See the fuse. and relay layout map on the inner surface of the. cover of the IPM for rear window defogger relay iden-
What is controlled by the IOD fuse?
The ignition Off Draw (IOD) fuse is used to prevent battery discharge during shipping or long-term storage of the vehicle. When the IOD fuse holder is depressed into the carrier, an initial distinct detent will be felt to overcome the “pre-hold” position.