How do you change the draw length on a Mathews?
Rotate the adjustment wheels on the cam, one mark up to increase draw length or one mark down to decrease draw length. For example, if you wish to decrease the current draw length of the bow by 1 inch, and the cam is set to mark “C” or mark “3,” rotate the wheel to mark “B” or mark “2.”
Can you adjust the draw length on a Mathews SoloCam?
Draw Length If your new Mathews SoloCam bow is equipped with a “StraightLine” MaxCam, which is draw length specific, there is no adjustment on the cam. The draw length on your bow is adjustable on the cam a maximum of one inch down from the peak draw length.
What year was Mathews Z7 made?
Mathews Inc. has been on the top single cam market for several years and they plan on maintaining that lead with the introduction of the Z7 for 2010.
How much does a Mathews Z7 Extreme weigh?
Mathews Z7 Xtreme Specifications
|Brace Height||7.375 “|
|Draw Weight||40 lbs – 70 lbs|
|IBO Speed||330 fps|
How do you change the draw length on a Mathews HTR?
Simply remove the two allen screws that hold the module to the wheel and install your new module in it’s place. As noted earlier these modules can change both your draw length as well as your let-off, which will change your bow’s speed. The lower the let-off the faster the bow.
How do I measure my draw length?
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.
Can you change Mathews Z7 draw length?
The cam’s design offers IBO speeds reaching 332 fps with a comfortable, 80-percent letoff. Draw lengths range from 25-30 inches, in half-inch increments. To make the job of changing cams easier, Mathews gears up the Z7 with its unique Quick Change Axle (QCA) feature.
How do you measure draw length on a Mathews bow?
While standing naturally, have a friend grab a measuring tape and measure across your back from the tip of one finger to the tip of the other. Divide that number by 2.5 to find the draw length that is right for you.
What year is the Mathews Z7 Extreme?
The Mathews Z7 Xtreme is a high quality and great shooting bow from the Z7 series launched by Mathews in 2010….Mathews Z7 Xtreme vs. original Mathews Z7.
|Bow||Mathews Z7 Xtreme||Mathews Z7|
|Brace Height||7.375 “||7 “|
|AtA Length||28 “||30 “|
What is the difference between the Mathews Z7 and Z7 Extreme?
First of all, the new Z7 Xtreme has been designed to be more compact: with 28″ from axle to axle, it is 2 inches shorter than the original Z7. Also, the Xtreme has a slightly more forgiving brace height (7 3/8″ inches compared to 7″ on the standard Z7).
Can you adjust draw length on Mathews VXR?
Proven accurate in the field, this revolutionary cam system, allows you to change draw length and peak draw weight into 5 pound increments with the simple change of a mod. available in 60,65, 70 and 75 pound peak weights, each set of mods are programmed for an incredibly smooth draw and maximum efficiency.