What sizes do Splashbacks come in?
SIZES. What sizes do the splashbacks come in? Our glass splashbacks are available in 600mm(w) x 750mm(h) & 900mm(w) x 750mm(h) which fit perfectly behind most cookers, hobs, ranges, and sinks. Cut to Fit splashbacks are available in 3000mm x 600mm panels.
How thick should a splash back be?
A: Splashback thickness is usually 6mm, but we can do other thicknesses e.g. 8mm. Q: Can you see through the splashback glass? A: The glass is back-painted so you cannot see through to the wall or the adhesive. So unlike stained glass, it is a completely opaque finish.
Are Splashbacks a standard size?
Standard size splashbacks are available in Small (600mm x 750mm), Medium (700mm x 750mm) and Large (900mm x 750mm) which are perfect for almost any kitchen.
How do you measure a splash back?
60 second clip suggested3:13How To Measure For Glass Splashbacks – A Simple GuideYouTubeStart of suggested clipEnd of suggested clipAt work top level from the wall to the left hand vertical from the wall to the right hand vertical.MoreAt work top level from the wall to the left hand vertical from the wall to the right hand vertical. And the distance in the center. Between the two vertical lines repeat.
What can I use for a splash back?
Apply neutral cure silicone adhesive in ‘blobs’ on the rear of the splashback. Gentely push the glass splashback against the wall. Leave the splashback in place until the adhesive cures. Seal around the edges.
Can a splash back go over tiles?
Splashbacks can be installed over existing tiles, providing they’re securely attached to the wall and there are no cracks or broken tiles which might impact the adhesion of the panel. Any exposed tile edges can then be finished with silicone or finishing trims.
What is the average height of a splashback?
The standard backsplash in the kitchen, the area on the wall above the countertops but beneath the cabinets, generally runs between 15 and 18 inches tall for people of average heights.
How high should a kitchen splashback be?
Standard Backsplash Height In general, the backsplash is installed to the height of four inches from the surface of the countertop. These backsplashes can be of any material or color, but we suggest that it compliments the cabinets and the countertops.
Can you have acrylic splashback behind gas cooktop?
Most acrylic splashbacks are not suitable for use with a direct heat source such as the rear of gas or electric hobs (they have a heat resistance of up to 160°C). Acrylic splashbacks, however, are tough and virtually impact resistant so they are able to withstand daily knocks.
How do I make a glass splashback template?
60 second clip suggested3:20How To Produce A Perfect Glass Splashback Template – YouTubeYouTube