What is the stock gear ratio in Jeep Wrangler TJ?
The stock gear ratio tends to vary depending on the year and package your Jeep has. Some of the possible ratios include 3.07, 3.55, 3.73, and 4.10. Wranglers that are equipped with the Rubicon package typically come with the 4.10 gear set in their Dana 44 axles.
What gears for TJ with 35s?
With the 6 speed manual and 35s, 4.56 gears are perfect.
What gear ratio is best for 33 inch tires?
While 4.56 is ideal for 33″ tires and 5-speed transmission, the 3-speed auto’s lack of an verdrive makes 4.10 the best all-around street and offroad ratio. The only time you’d want 4.56 with 33″ tires and 3-speed automatic is if your engine was the 2.5L four-banger.
What gears should I run with 37 inch tires?
Upgrading to 37-inch tires would calculate to about a 16 percent increase in tire diameter. Increasing the 4.10 axle ratio by 16 percent would dictate the need of a 4.75 axle ratio to match the 37-inch tires.
Will VIN number tell me gear ratio?
The Gear Ratio Could Be In Your VIN Code Or Identification Plate. Every number and letter within a VIN reveals information about the automobile, such as the make, model, year built and the engine size.
Are 3.73 gears good for 35 tires?
You can do it but it’s definitely not ideal. The ratios with a 5.13 first on a 3.73 rear end and 35’s (your proposed setup) is very slightly taller than what a stock 6MT Tacoma is in first gear so it’s not like you’re going to be causing massive wear getting started.
What gears for XJ on 33s?
Gear Ratio For 33-Inch Tires A good gear for an AW4 automatic with 33-inch tires is a 4.10:1 or 4.56:1 gear ratio. Both of these will keep you around the stock drive ratio. Personally, we think the 4.56:1 gear ratio is better thanks to its improved acceleration and crawling abilities.
What to look for when buying a Jeep Wrangler TJ?
Buying a TJ Wrangler is much like buying any other vehicle. Check for obvious things like the condition of the fluids. Don’t be afraid of anything you find wrong with the Jeep because you can use it to your advantage during the bargaining process. Other than the things we mentioned, the TJ Wrangler is a pretty tough and reliable vehicle.
What is the difference with TJ YJ jeeps?
The most noticeable differences between TJ and YJ from the outside are the headlights, roll bar shape, and pressence of leaf springs (long bowed flat metal strips instead of springs at the wheel base). Also, the blinkers for the TJ are on the fenders instead of the grill.
Does a YJ hardtop fit a TJ?
There are alignment dowels on both, and the YJ and TJ do not match in this regard. Some cutting/drilling will have to be done to get these to work. Also, the holes for the bolts do not line up. Same thing, some cutting/drilling will have to be done. The one part that does NOT fit are the YJ door surrounds with a TJ top – they need weatherstripping.
What is the bolt pattern on a jeep TJ?
While most Jeeps have five lugs, that doesn’t mean that the spacing between each stud will always be identical. So the bolt pattern will not only tell you how many studs or holes there are, but it will also tell you the spacing between them. If you imagine the lug nuts form an invisible circle, it’s a bit easier to conceptualize.