What is the color code for CAT 5 cable?
Crossover Cable Wiring Diagram:
RJ45 Pin # (END 1) | Wire Color | Wire Color |
---|---|---|
4 | Blue | White/Brown |
5 | White/Blue | Brown |
6 | Green | Orange |
7 | White/Brown | Blue |
What is a cat 5e port?
CAT 5e Cable is A Twisted Pair Copper Cable used mostly in Telecommunication and Networking Field. It is the Enhanced Version of CAT 5 Cable which Support speeds upto 1000 MBPS and having the frequency range upto 100Mhz. Pro’s of this Cable: High Availability in Market. Low Cost compared to CAT6 Cable.
Does the order of Cat5 wires matter?
For making a standard cat 5 cable, you’ll want to arrange the color-coded wires in the same order on both ends. It actually doesn’t matter which order you put the colors in, as long as it’s the same on both ends.
What wires are actually used in Cat5?
CAT5 contains four pairs of 24-gauge copper wiring and ends in a standard RJ-45 jack. This type of copper wire cabling is known as twisted pair cabling and is only recommended for a maximum distance of 100 meters or 328 feet. While it does contain four lines of copper wire, two of these copper wires lie dormant.
What is a Cat5e crossover cable used for?
Crossover cable such as Cat5, Cat5e crossover cable, etc. is a type of twisted pair cable used to connect two devices of the same type such as “DTE to DTE” or ”DCE to DCE” in the following situations: One computer to another computer. One switch to another switch connecting a normal port on both sides.
What is Cat5 in networking?
Category 5 cable (Cat 5) is a twisted pair cable for computer networks. The cable standard provides performance of up to 100 MHz and is suitable for most varieties of Ethernet over twisted pair up to 2.5GBASE-T but more commonly runs at 1000BASE-T (Gigabit Ethernet) speeds.
Which should I use T568A or T568B?
Although T568B is the most widely used, the T568A wiring scheme is seen as the better wiring scheme for RJ45 modular plugs because it provides reverse compatibility to not only one, but also two-pair USOC wiring setups. If you are installing in a residential setting, use T568A, except when other situations apply.