What does it mean when your gear shifter is loose?
Generally, most all gear shifters will become loose due to aggressive gear changing from the gear shifter. Aggressive gear changing can cause damage to the bushing on the bottom of the gear shifter lever. Once the bushing is damaged, it will cause slack in the gear shifter.
How do you adjust the shift cable on a 2001 Ford Ranger?
Insert a flatblade screwdriver between the end of the shift cable >>adjustment lock tab and the housing and twist the screwdriver to >>disengage the lock tab snaps. Pull the shift cable adjustment lock tab >>outward to the unlock position. >> Place the manual control lever in the (D) position.
Can you drive with loose gear stick?
The only danger to driving it is if its hard to get into gear when you need to get going; such as uphill from a stoplight or in slow heavy traffic. I had the similar problem with my 5 speed Dodge Omni; an exceedingly sloppy shift lever – which was common on the mid 80’s models.
How much does it cost to fix a shifter cable?
The shift cable itself would be around $120 to $200, and labor, depending on location, could be between $140 to $176. Keep in mind that this will vary depending on your location and year of your vehicle.
Is there a loose column shifter linkage on a 1998 Ford Ranger?
Video tutorial on how to repair a common issue amongst may Ford trucks which causes sloppy or loose column shifter linkage. This particular truck is a 1998 Ford Ranger, but this issue can be found on similar generation F series trucks as well. This is an extremely easy fix and the only item required for the repair is thread locker.
What’s wrong with my manual shifter?
Manual shifter was loose/sloppy when engaged into any gear. There was a plastic bushing on the end of the shifter where it connected to the top of the trans. that had been completely worn through. Replaced the bushing and it solved my problem.
What kind of repair is needed on a 1998 Ford Ranger?
This particular truck is a 1998 Ford Ranger, but this issue can be found on similar generation F series trucks as well. This is an extremely easy fix and the only item required for the repair is thread locker.
What are the symptoms of bad column shifter linkage?
As you can see there is excessive play in the column shifter linkage, either making it hard to select a gear, not allowing gears to properly engage, having issues engaging park, and also not activating the safety switch when in park.