How do you use FaderPort in Pro Tools?

Posted on by Muna Meyer

How do you use FaderPort in Pro Tools?

What PreSonus Faderport Can Do In Pro Tools Mode. By default, the FaderPort will be in its native Studio One mode. To switch to Pro Tools mode, you need to press and hold the NEXT button while powering on your FaderPort, then press the Touch button to enable Pro Tools (HUI) operation.

How do I use FaderPort 8 with Pro Tools?

How do I setup my FaderPort 8 with ProTools?

  1. Power off the FaderPort 8.
  2. Hold the first and second “Select” buttons on the FP8.
  3. Power the unit back on.
  4. Once the unit has powered up and displays “Select Control Mode” across the top of the scribble strips you can release the Select buttons.
  5. Select “HUI”

How do you put a FaderPort in MCU mode?

To enable MCU (Logic) mode on the FaderPort:

  1. Power OFF FaderPort.
  2. Press and hold the first two channel SELECT buttons.
  3. While still holding the SELECT buttons, power ON FaderPort.
  4. Release the SELECT buttons once the screens display a choice of Operation Modes.
  5. Press the SELECT button under the screen displaying “MCU”

How do I update firmware on FaderPort 8?

Simply download and install Universal Control (UC) for either PC or Mac here, connect your FaderPort8 to your computer via USB, open UC, and the application will inform you of, and execute, any necessary firmware updates.

How do I reset my PreSonus FaderPort?

You can do this by powering on the unit holding down “Prev” and then the “Read” button will blink. Press “Read” and the unit should reset to factory firmware and then update the firmware.

How do I install FaderPort?

  1. Go to Logic > Preferences > Control Surfaces > Setup.
  2. In the Setup window, go to New > Install.
  3. Select PreSonus FaderPort from the list of control surfaces and click “Add”, then close the device list window.
  4. Set the Output Port to “FaderPort and the Input Port to “FaderPort”

How do I connect my PreSonus FaderPort to Studio One?

Turn the Faderport off, then hold the first two Select buttons. While holding the buttons, power the unit back on. The display will show Studio One, Mackie, and HUI. Press the select button to set it to the appropriate personality.

How do I reset my presonus FaderPort 8?

To access the Reset to Factory mode on the FaderPort 8 or FaderPort 16:

  1. Hold down Select buttons on Channels 1 and 2 and turn the unit on.
  2. Select Setup.
  3. Then select Factory Reset.

How do I connect my FaderPort to Studio One?

By default, your FaderPort is configured for Studio One. No further device setup is required. If you have changed the FaderPort’s Operation Mode and would like to return to using it with Studio One, press and hold the NEXT button while powering on your FaderPort, then press the Solo button to enable Studio One.