Can you put Dodge 360 heads on a 318?
On Magnum engines of the MPI variety, 318/360 heads are identical. The piston differences are for compression ratios, not valve clearances, in this case.
How much power can you get out of a 318 engine?
A street-worthy 318 can easily make 400 horsepower, about what a lot of street 360s put out.
What is a Dodge 5.2 L?
Dodge’s 5.2-liter engine features a V-type eight-cylinder construction with a 318-cubic inch displacement. The 5.2-liter 318 CID is a lightweight, single cam engine with hydraulic roller tappets. Its cylinder blocks and cylinder heads are made of cast-iron, and its camshaft is made of nodular cast-iron.
Is a Dodge 360 a good motor?
The Mopar 360 can make an excellent performance engine. It was introduced with a 2-bbl carburetor in 1971. Not intended as a performance engine, it also featured a cast crankshaft and low compression ratio (8.5 to 1) cast pistons. In spite of this rocky start, the 360 can be built into an excellent street engine.
How much HP does a 318 have?
The power ratings of the new LA-series 318 were exactly the same as those for the old polyspherical-head design, 230 hp and 340 lb-ft….Premium Member.
|Specifications (net)||318 (2 barrel)||340 (4 barrel)|
|1977 horsepower||145 @ 4,000|
|Torque, 1971 (SAE net)||260 @ 1,600||305 or 310|
How much HP does a stock 318 have?
The 318 (5.2 Liter V-8) The power ratings of the new LA-series 318 were exactly the same as those for the old polyspherical-head design, 230 hp and 340 lb-ft.
What liter is a Dodge 360?
The LA 360 cu in (5.9 L) has a bore and stroke of 4 in × 3.58 in (101.6 mm × 90.9 mm). It was released in 1971 with a two barrel carburetor. The 360 used the large intake port 340 heads with a smaller intake valve of 1.88 in (48 mm).